Exterior (external body elements) Skoda Fabia 2

Body — vehicle parameters
Vehicle identification number The vehicle identification number is stamped on the right shock absorber casing. The vehicle identification number is also located in the lower left corner of the windshield. 1 - World...

Body — front part
Assembly diagram of the complete module of the front wall of the body 1 - Front wall of the body Remove the front bumper. Remove the headlights. Remove the front bumper bracket (item 4). Disconnect the Bowden cable...

Car underbody trim
Assembly diagram of the lower body underbody covers Remove nuts "2" (2 Nm). Remove the underbody protection plate "1" or "3" (left or right). Installation should be carried out in the reverse order of actions. Tunnel...

Engine hood
Engine hood assembly diagram 1 - Hood After removing the "12" screws, remove the hood. Installation Installation should be carried out in the reverse order of actions, and it is necessary to: fit the engine hood,...

Trunk lid
Assembly diagram of the trunk lid 1 - Trunk lid 2 - Rubber adjustment buffer 3 - Spherical pin - 20 Nm 4 - Gas-filled shock absorber (stop) Gas-filled shock absorber "1". Retaining clamp "2". Ball joint "3"....

Fuel tank filler cap module
Assembly diagram of the fuel tank filler cap module 1 - Fuel tank filler cap 2 - Fuel tank filler cap module Open the fuel tank filler cap (item 1). Remove the fuel tank filler cap. Using a lever-like motion, remove the...

Front door
Front door assembly diagram 1 - Door; 2 - Door handle; 3 - Lock cylinder; 4 - Cap; 5 - 20 Nm; 6 - Bowden cable; 7 - Lock cylinder plate; 8 - 20 Nm; 9 - Door lock; 10 - Seal; 11 - 9 Nm; 12 - 20 Nm; 13 - 20 Nm; 14 - Lower...

Back door
Rear door assembly diagram 1 - Door; 2 - External door handle; 3 - Body with cap; 4 - Cap; 5 - 20 Nm; 6 - Bowden cable; 7 - Lock cylinder plate; 8 - 22 Nm; 9 - Door lock; 10 - Lock seal; 11 - Sealing of the device...

Roof hatch
Assembly diagram of the hatch 1 - Glass lid (single-layer safety glass); 2 - Seal; 3 - Sun visor; 4 - Upper casing; 5 - Lower casing; 6 - Remove the water drainage channel together with the guide link (pos. 20); 7 -...

Front bumper
Front bumper assembly diagram 1 - Front bumper Partially remove the front wheel arch (fender) liner. Remove the screws (pos. 2). Remove the screws (pos. 3). Remove the bee rivets (pos. 6). Unscrew the screws (pos.5 and...

Rear bumper
Rear bumper assembly diagram 1 - 3.5 Nm 2 -1.5 Nm 3 - Beekeeping rivets 4 - Bumper - Remove the screws (pos. 1 and pos. 2). Remove the expansion rivets (item 3). Pull the rear bumper out of the guide profiles towards...

Glass glued into the body cutout
Windshield assembly diagram 1 - Windshield; 2 - Glass seal; 3 - Polyurethane adhesive mastic; 4 - Size - a = 4.3±0.5 mm; 5 - External decorative cover of the A-pillar; 6 - Adjusting pin; 7 - Waterproof casing cover Rear...

Wheel arch (fender) liner
Removal and installation the front wheel arch (wing) liner Unscrew screws "2" (1 Nm). If necessary, remove the wheel. Remove the wheel arch (fender) liner "1". Installation should be carried out in the reverse order of...

Rearview mirror
Rearview mirror assembly diagram 1 - Outside rearview mirror Remove the door molding. Disconnect the rear view mirror connector (depending on the vehicle's equipment) (pos. 4). Remove the sound insulation (pos. 5)....

Waterproof casing cover
Assembly diagram of the waterproof casing cover 1 - Waterproof casing cover Remove the windshield wipers. Remove the hood seal (item 7). Remove the plastic nuts (item 2). Remove the waterproof casing cover (item 1)....

External decorative cover of the A-pillar
After opening the front door, remove the screws "3" (1.8 Nm). Carefully remove the cover. lever movements from plastic clamps. Unhook the cover from the rack and remove it. Installation should be carried out in the...

Disassembly and assembly of the heating system
1 - Heating system wiring harness, carefully cut the insulation to remove, when installing, install new cable clamps in the same place; 2 - Heater body - upper and lower parts, connected with clamps; 3 - Additional...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Body and interior: Exterior (external elements) Skoda Rapid 1 (2012-2022)
➧ Body and interior: Exterior (external elements) Skoda Octavia 1 (1996-2004)
➧ Body and interior: Exterior (external elements) Skoda Superb 2 (2008-2015)
➧ Body and interior: Exterior (external elements) Skoda Kodiaq 1 (2016-2024)
➧ Body and interior: Exterior (external elements) Skoda Yeti (2009-2017)
➧ Body and interior: Exterior (external elements) Skoda Felicia (1994-2001)

Link to this section in various formats

TEXTHTMLBB Code

Fabia 2 (2007-2014)