The lever of the switch of indexes of turn and light of headlights
Positions of the lever of the switch of indexes of turn and light of headlights
1 – the lever of the switch of indexes of turn and light of headlights; 2 – a steering wheel; 0, I, II, III, IV - lever positions
Attention! High and low beam headlights, as well as direction indicators are switched on only when the ignition is on.
Position 0 is the neutral position of the lever. Everything is off. You can turn on the dipped headlights with the central switch.
Position I - the right direction indicator is on. At the same time, the control lamp in the instrument cluster lights up. When the steering wheel is returned to the straight ahead position, the lever will automatically return to the neutral position.
Position II - the left direction indicator is on. At the same time, the control lamp in the instrument cluster lights up. When the steering wheel is returned to the straight ahead position, the lever will automatically return to the neutral position.
Position III - high beam on (non-fixed position) - you can signal with high beam headlights («blink»).
Position IV - high beam on (fixed position).
To turn on the parking lights with the ignition off, set the lever to position I to turn on the right lamp, or to position II to turn on the left.
Attention! If after removing the key from the switch (castle) If the ignition lever is not in the neutral position, an audible signal sounds when the driver's door is opened. The signal stops when the door is closed.
The lever of the switch of cleaners and washers of glasses
Positions of the lever of the switch of cleaners and washers of glasses
1 - lever switch cleaners and washer glass; 2 – a steering wheel; 3 - rain sensor switch knob
Attention! Windshield wipers and washers are included only when the ignition is on.
The lever can take the following positions:
- 0 - neutral position of the lever. Everything is off;
- I - intermittent wiper operation. Switch 3 can be used to select one of four intermittent operating frequencies;
- II - low speed wiper;
- III - high speed wiper;
- IV - single operation of the brushes;
- V - washer on (non-fixed position). Simultaneously with the washer, the windshield wiper will turn on. In this case, after releasing the lever, the brushes will make from 1 to 3 moves, depending on the washer operation time;
- VI (station wagon and hatchback models) - intermittent operation of the tailgate glass wiper (frequency 6 s);
- VII (station wagon and hatchback models) - the tailgate glass washer is on (non-fixed position). Simultaneously with the washer, the tailgate glass wiper will turn on. In this case, after releasing the lever, the brushes will make from 1 to 3 strokes, depending on the washer operation time.
Attention! With the windshield wiper on, the tailgate wiper blade will automatically make one stroke after reverse gear is engaged.
Some vehicles are equipped with a rain sensor. It determines the frequency of intermittent wiper operation depending on the intensity of the rain. The sensitivity of the sensor can be adjusted with knob 3 with the lever in position I.
Attention! Every time you turn on the windshield washer (with side lights on, as well as high or low beam) after 3 s, the headlight washers operate once.