Manual gearbox 002 car Skoda Fabia 1

Two types of mechanical five-speed gearboxes are installed on cars: 002 and 02T.

Gearbox repair requires a certain skill and a special tool. Therefore, in the event of a gearbox failure, contact a service station.

Technical characteristics of gearboxes
Parameter Engine 1.0 l, 37 kW 1.4 l, 50 kW 1.4 l, 74 kW 1.4 l, 55 kW 1.9 l, 47 kW Type of KP 002 02T KP model EMJ EMH EYW EYX EYY Gear ratios: - 1 gear 3,462 3,462 3,455 3,455 3,455 - 2nd gear 1,957 1,957 2,095 2,095...

Removal and installation the gearbox
Gearbox Drive Cable Bracket Mountings Type 002 1 – bracket mounting bolts; 2 – bracket Fastening the drive cables to the gearbox 1 – lever axle; 2 – gear selection lever; 3 – gear engagement cable; 4 – gear selection...

Checking the level and filling the gearbox oil
Gearbox oil filler plug type 002 1 – cork; 2 – gearbox 1. Unscrew the threaded plug 1 of the oil filler hole. 2. The gearbox oil level should be at the lower edge of the oil filler hole. Otherwise, add oil to the...

Filling a new gearbox
1. Unscrew the screw plug 1 (see figure Gearbox oil filler plug type 002 ) oil filler hole. 2. Fill the gearbox with transmission oil up to the lower edge of the oil filler hole. 3. Tighten the oil filler plug to 25 Nm....

Replacing the gear shift boot
Gear shift boot mounting parts 1 – handle; 2 – case; 3 – retainer; 4 – clamp; 5 – floor console lining Removal the gear shift boot from the frame Removal the cover from the handle 1 – case; 2 – retainer; 3 – handle; 4 –...

Removal and installation the gear shift drive
Disconnecting the drive cables from the gearbox levers of type 002 1 – wrench; 2 – gear shift cable; 3 – gear selection cable; 4 – ball joint Gear shift mechanism parts 1 – retaining ring; 2 – upper bushing; 3 – spring;...

Disassembling and assembling the gearshift mechanism
Fastening the gearbox drive cables 1 – gear shift cable; 2 – gear selection cable; 3 – cable end retaining ring; 4 – retaining ring; 5 – mechanism body; 6 – drive cable bracket; 7 – pillow; 8 – spacer bushings; 9 –...

Checking the correct adjustment of the gear shift drive
Place the gear shift lever in neutral position. Press the clutch pedal and engage all gears several times. If any of the gears stick when engaged, check the axial clearance of the gear shift shaft. Checking the axial...

Adjusting the gear shift drive
Releasing the cable end clamps 1 – spring; 2 – retainer; 3 – tip Locking the gear shift lever 1 – gear shift lever; 2 – lever guide; 3 – mechanism body; 4 – rod 1. Place the gear shift lever in neutral position. 2. On...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Link to this section in various formats

TEXTHTMLBB Code

Fabia 2 (2007-2014)