Two types of mechanical five-speed gearboxes are installed on cars: 002 and 02T.
Gearbox repair requires a certain skill and a special tool. Therefore, in the event of a gearbox failure, contact a service station.
Removal and installation of a transmission 02T transmission cable bracket fasteners 1 – a bolt of fastening of an arm; 2 - bracket; 3 - tube holder; 4 – a tube of a hydraulic drive of coupling; 5 - working cylinder Removing the drive levers to the gearbox 1 – a...
Checking the level and filling the oil in the gearbox 1. Unscrew the screw plug 1 of the oil filler hole (2 - gearbox). 2. The oil level in the gearbox should be at the lower edge of the oil filler hole. Otherwise, add oil to the gearbox. 3. Screw in the oil filler plug...
Removal and installation of the gear change drive Disconnecting the drive cables from the gear levers type 02T 1 - wrench; 2 - pliers; 3 – a cable of inclusion of transfers; 4 – a cable of a choice of transfers; 5 - ball pin 1. Remove the battery and its mounting...
Disassembly and assembly of the gear shift mechanism The disassembly and assembly of the gear shift mechanism is carried out similarly to the disassembly and assembly of the gear shift mechanism of models with a gearbox type 002 (see subsection 7.1.2.6 ).
Adjustment of a drive of a gear change The gearshift drive is adjusted in the same way as the drive for models with gearbox type 002. In the figure Disconnecting the drive cables from the gear levers type 02T Lugs with drive cable locks shown on models with...
Removal and installation of a drive of forward wheels Front suspension parts 1 - telescopic stand; 2 - wheel drive assembly; 3 - locking plate; 4 – a bolt of fastening of the case of an internal SHRUS; 5 - wheel drive with internal CV joint «tripod»; 6 - locking plate...