Removal and installation ECM (Skoda Yeti 5L)

1. Before removing the ECM, read its identification data and coding. If the ECM is removed for replacement, connect a scan tool and perform the function "Replace engine control unit".

2. Turn off the ignition.

3. Remove the gutter cover (see Chapter 11) and its front wall (see illustration).



4. Open the lock (see illustration) and remove the ECM.



5. On models with a protective cover, make it with bolts (3 and 4 in the illustration) crosswise cuts, unscrew them with a screwdriver and remove the protective cover of the connectors (2 and 5).





6. After removing the ECM, you can disconnect its connectors.

(Material is available on the website: SkodaBook.ru)

7. Installation is carried out in reverse order. On models with ECM protection, use new shear bolts, tighten until head shears.