Battery mount
1 - bolt; 2 - bracket; 3 - holder
Battery holder mount
1 - holder; 2 - nuts; 3 - bolt
Removal and installation
1. Push plastic loops 2 aside (see fig. V paragraph 1 of subsection 1.52) and open fuse box 1 (lidded).
2. Loosen nut 1 (see fig. V paragraph 2 of subsection 1.52) fastening the tip 3 wires to the terminal «-» battery and disconnect the wire tip from the terminal «-».
3. Loosen the wire lug nut and disconnect the wire from the terminal «+» battery.
4. Set wire ends aside
5. Remove bolt 1 (see fig. Battery mount) fasteners and remove the bracket 2.
6. Remove the battery from holder 1 (see fig. Battery holder mount).
7. To remove the holder, remove cover 1 from it (see fig. V paragraph 1 of subsection 1.52) with an additional fuse box, unscrew the two nuts 2 (see fig. Battery holder mount) and bolt 3.
8. Install the holder and battery in reverse order.
9. When connecting the wires to the battery, tighten the fastening nuts so that the tips are put on the terminals tightly and cannot be moved by hand.