Removal the taillight
1 – lantern; 2 – latches; 3 – lamp holder; 4 – connecting block; 5 – nuts
1. Disconnect the wire from the "-" terminal of the battery.
2. Open the trunk and fold back the edge of the trim to access the light.
3. Disconnect connector 4 (see figure Removing the rear light) with wires from the rear light.
4. Unscrew the four nuts 5 of the fastening and remove the rear light 1.
5. Install the light on the body, screw on the nuts without tightening them completely; align the light with the body panels and finally tighten the nuts that secure it.