Upper headlight mount
1 – bolts; 2 – headlight
Lower headlight mount
1 – bolt; 2 – headlight
1. Disconnect the wire from the "-" terminal of the battery.
2. Remove the front buffer.
3. Disconnect the headlight connector from the wiring harness.
4. Unscrew two bolts 1 (see picture Upper headlight mount) upper headlight mount.
5. Unscrew bolt 1 (see picture Lower headlight mount) lower headlight mount.
6. Remove the headlight.
7. Install the headlight in reverse order.
8. Have your headlight beam adjusted at a service station.