3.1. Front left wing installation details 1. Soundproofing panel; 2. Nut, 8 Nm; 3. Front left wing; 4. Bolt, 8 Nm; 5. Upper wing support; 6. Lower wing support
2. Remove the outer A-pillar trim and wheel arch liner (see Section 6).
3. After removing the locker, remove the partition panel (1 in the illustration), having given away the nuts (1 in the illustration).
3.3. Removing the partition panel
Note: When installing, tighten the nuts to 2.5 Nm.
4. Remove the sound insulation (1 in the illustration), loosen the nuts (2), partially loosen the bumper corner, unscrew the bolts (4) and remove the wing.
This material is published on the portal: SKODABOOK.ru
5. Installation is carried out in reverse order. Finally, adjust the body gaps (see Specifications).