3.1 Installation details of the front left fender
1 Bolt, 8 Nm
2 Front left fender
3 Nut, 8 Nm
2. Remove the wheel arch locker (see Section 6).
3. After removing the locker, remove the dividing panel from the wing (3 on resist. illustrations), removing the soundproofing (1) and giving nuts (3).
3.3 Removing the partition panel
Note: When installing, tighten the nuts to 2.5 Nm.
4. Give nuts (3 in illustration 3.1), remove the bolts (1), open the front door and remove the fender.
5. Installation is carried out in the reverse order. In conclusion, adjust the body clearances (see specs).