Gaps between body elements, mm
Note: To measure gaps between body elements, use control plate set #3371.
Gaps in the front 1. not less than 3.0; 2. 4.5±1.5; 3,12. 3.5±0.5; 4. 6.7±1; 5. 2.2±0.5; 6. 2.6±0.5; 7. 3.5±0.5 (when measuring, check the size A - 50 mm); 8. 2.5±0.5; 9. 0.2±0.2; 10. not less than 2.0±0.5; 11. 3.5±4.5±1.3; 13. 4.0±0.5; 14. 5.5±0.5; 15, 17. 4.5±0.5; 16. 5.5±0.8
Gaps in the rear 1. 5.5±0.8; 2, 3. 3.5±0.5; 4,7,8,10-12. 4.0±0.5; 5. 1.5±0.5; 6. 3.0±1.25; 9. 5.0±0.5; 13. 5.0+1
Control body dimensions, mm
Note: All dimensions are for verification purposes only; the correct dimensions are set by the frame. Tolerances for all dimensions are ±2 mm.
a = 1381 (between the upper beams); b = 1120 (between the pillar supports); c = 940 (between the side members)
f = 1510 (between the B pillars, from the holes for the lock strikers); d = 1472 (between the C-pillars, from the holes for the lock strikers)
h = 1094 (between the sealing channels, from the holes for the tailgate pillars); n = 1128 (between the sealing channels, diagonally); o = 1251 (between the sealing channels, from the holes for the tailgate stops); p = 1004 (rear side members)
a = 956 (between the side members); b = 1004 (diagonally between the side member and the connection for the bonnet lock holder); c = 874 (between the front connections for the bonnet lock holder); d = 891 (diagonally between the front and rear connections for the bonnet lock holder); e = 836 (between rear connections for bonnet lock holder)
f = 1834 (diagonally between the reference point at the front of the rear subframe and the front subframe joint); g = 1220 (between checkpoints); h= 1531 (diagonally between the reference point at the front of the rear subframe and the front subframe joint)
j = 1075 (between the rear subframe joints); k = 1321 (diagonally between the rear subframe connection and the rear side member reference point); m = 987 (between the rear side members)