Engine
Valve clearances:
- Inlet valve 0.2mm
- Exhaust valve 0.2mm
Oil filter type - Champion C130
Cooling system
50% antifreeze:
- Freezing start -36°С
- Complete freezing -48°C
Fuel system
Idle speed - 800±50 rpm
CO content - 10%±0.5%
Fuel filter element type:
- From 1989 to January 1992 - Champion is not used
- Since January 1992 - Champion L101
Air filter element type - Champion W110
Ignition system
The order of operation of the cylinders is 1-3-4-2
Cylinder #1 Location - Crankshaft Pulley Side
Direction of rotation of the crankshaft - Clockwise
Direction of rotation of the distributor slider - Clockwise
The ignition timing is measured with a stroboscope at idle (vacuum hose disconnected):
- Engines 135 - 2°± 2°BTDC at 750 rpm
- Engines 136 - 5°± 2°BTDC at 750 rpm
Spark plug:
- Engines 135 - Champion RC7YCC
- Engines 136 - Champion S7YCC
Interelectrode gap — 0.8 mm
High voltage wires - Champion LS05
Clutch
Pedal Height Adjustment - At or 10mm below the brake pedal
Brake system
The minimum thickness of the front friction lining of the brake pad is 2.0 mm
The minimum thickness of the friction lining of the rear brake pad is 1.0 mm
Tire pressure (cold)
front | Rear | |
Hatchback: | ||
Half loaded | 1.9 bar | 1.8 bar |
Fully loaded | 2.1 bar | 2.0 bar |
Station Wagon and Van Models: | ||
Half loaded | 1.9 bar | 1.8 bar |
Fully loaded | 2.1 bar | 2.1 bar |
Pickup: | ||
Half loaded | 1.9 bar | 1.8 bar |
Fully loaded | 2.1 bar | 2.3 bar |
Electrical system
Deflection of the drive belt when pressed with the thumb in the middle of its largest run - 10-15 mm at a pressure with a force of 2 kg
Wiper blades (front) — Champion Х-4503
Wiper blades (rear) – Champion X-3303
Refueling tanks
Cooling system - 6.0 l
Fuel tank - 47 l
Transmission - 2.4 l
Washer system reservoir - 3.5 l
Tightening torques, Nm
Spark plug:
- Engines 136 - 24-30
- Engines 135 - 13-20
Engine oil drain plug 49-65
Coolant drain screw 15-25
Rotary axle and alternator clamp bolts:
- M 8 - 16-24
- M 10 - 28-42
bolts wheels - 60-90