Note: When installing a new instrument cluster, the ECM data must be transferred to it, otherwise the immobilizer will not work. After replacing the instrument cluster, the keys must also be programmed. Before starting the instrument cluster replacement, connect the diagnostic tool and run the procedure "adjust/replace dash panel insert".
1. Turn off the ignition and remove the key from the ignition switch.
2. Extend and lower the steering column to the stop.
3. Release and remove the overlay (2 in the illustration). Remove the screws (arrows) and pull out the instrument cluster by pulling it by the round segments (3).
18.3. Instrument cluster fastening
4. Press the lock (1 in the illustration) and disconnect the connector by pulling the bracket in the direction of the arrow.
18.4. Removing the instrument cluster connector lock
5. Installation is carried out in reverse order.