A/m with the middle and rear parts of the exhaust system combined into one unit
Cut the exhaust pipe at the dividing point "arrow 1" at a right angle using a body saw, e.g. VAG 1523/A-.
Cars with split middle and rear exhaust system
Loosen the rear coupling sleeve and move it back.
The original article is located on SKODABOOK
Replacing the middle part of the exhaust system
Unscrew nuts -1 and 3- and remove the rear tunnel cross member "2".
Loosen the front clutch "arrow" and move it forward.
Unscrew the screws "4" of the suspension and remove the middle part of the coolant exhaust system.
Replacing the rear part of the exhaust system
Unscrew screws -2 and 3- of the rear suspension and remove the rear part of the coolant exhaust system.
Installation
Installation in reverse order. When installing, align the rear clamping sleeve "4" with the side marks "see arrow 2" and -see arrow 3-.