Cabling — general information Scheme of strengthening the contact in the connector housing The contact is fixed in the connector housing without secondary fixation with an additional cartridge. Contact 1 - fixing part (stainless steel); 2 - contact...
Fuse panel and relay panel Fuse panel for a car with steering on the left side Some consumers have 2 functions, so 2 fuses are used. * According to the equipment of the car, one of the two options is used. Relay panels Micropanel: 1 – sound...
Fuse box on the battery Fuse box mounted on the battery - connection * according to vehicle equipment ** B = carburetor engines, D = diesel engine At positions 1 A, 2A, ZA, knife horseshoe-shaped classic fuses are inserted into the terminals....
Egnition lock The ignition lock is inserted into the casting of the control lock as a wiring assembly unit. It is connected to the wiring with a circular connector. It is controlled by a flat patented key. The following connectors...
Immobilizer — general information Immobilizer 1 - engine control unit; 2 - immobilizer control unit in the dashboard; 3 - reading coil in the lock cylinder; 4 - ignition key; 5 - keychain to the key with the code number All Skoda Octavia cars are...
Battery — general information Safety symbols on the battery cover Four types of batteries are installed on Skoda Octavia cars in primary production. For cars with a carburetor engine 1.6–55 kW; 1.6–74 kW; 1.8-92 kW alternative (according to...
Main headlights — general information and adjustment Installing the front turn signal lamp 1 - headlight; 2 - lamp of the front direction indicator; 3 - emphasis; 4 - wing; 5 - bolt Main headlight - mounting reamer 1 - bracket; 2 - light-scattering glass; 3 - headlamp...
Front indicator light Front direction indicator lamp - the same for all vehicle versions (see fig. Installing the front turn signal lamp ). It has a plastic body, welded to the outer cover, made of transparent organic glass with a...
Side indicator light Side indicator light 1 – a lantern of the lateral indicator of turn; 2 - cartridge with a lamp; 3 - hole in the front wing The side indicator lamp is welded from a plastic housing and an orange organic glass cover. The...
Rear integrated lamp Rear integrated lamp (mounting reamer) 1 - lamp body; 2 – a lamp of a back antifog lantern (12 V, R 21 W); 3 - side light lamp (12V, R 5W); 4 - fastening nuts; 5 - body; 6 - lamp holder; 7 - turn signal lamp (12 V, R 21...
License plate light Mounting the license plate light 1 - license plate lighting overlay; 2 - lamp The state identification mark is illuminated by two lamps, which are parts of the decorative lining of the tailgate. Glass is fixed in the...
List of lamps used in cars Taking into account the need to carry with you at least one spare lamp of each type, below is a list of lamps used in Skoda Octavia lamps. All lamps are rated for 12V. * lamp category index according to UNECE The...
Sound signal — general information For cars with LX version, a waterproof signal is used, tuned to a frequency of 335 (+20% -10%) Hz. The signal is fixed on a steel curly bracket mounted on the front of the left side member of the body frame. The...
Windshield wiper system Installation of a kit consisting of a wiper motor, cam mechanism and support element 1 - wiper motor with connecting piece; 2 - combined bolt M 6 x 18; 3 - nut M 6 (welded); 4 - mounting console Installation of brushes...
Washer-sprinkler for windshield and headlights Installation of windshield washers 1 – dividing partition cover 2 – nozzle assembly; 3 - reinforcing sleeve; 4 - fluid supply to the washers Installation of headlight washers 1 - front bumper; 2 - nozzle holder assembly...