Manual gearbox 02K car Skoda Octavia 1

Position for assembling the gear shift drive
Caution! For vehicles with a radio equipped with an anti-theft jamming code, the code must be identified and marked. In order to carry out work on the gearshift drive, the battery cable must be disconnected to ground....

Assembly Diagram — Drive Housing / Gear Shift Lever
Assembly Diagram - Drive Housing/Gear Shift Lever 1 – gear shift lever ball head (when disassembling, remove the casing, position 2); 2 – casing with frame (remove the frame, while disassembling, check the ball head of...

Assembly diagram of the gear shift drive
Assembly diagram - gear shift drive switching 1 – self-locking nut, 25 Nm (gear shift lever to gearbox); 2 – gear shift lever (only fits well in one position on the gear shift control shaft); 3 – rack; 4 – gear shift...

Disassembly and assembly of the gearbox
Disassembly and assembly of the gearbox I – disassembly and assembly of the gearbox housing cover and 5th gear; II – disassembly and assembly of the gearbox housing and gear shift control shaft; III – disassembly and...

Disassembly and assembly of primary and secondary shafts, differential and forks
Primary and secondary shafts, differential and gear shift forks 1 – retaining ring (replace the ring every time); 2 – gear for 4th gear (assembly position); 3 – retaining ring (for the 3rd gear, determine the thickness...

Assembly and disassembly of the primary (drive) shaft
Attention! When installing new gears, observe the technical data. Primary (drive) shaft 1 – screw M17, 150 Nm (replace); 2 – disc spring; 3 – sliding clutch/carriage (hub) of synchronizer for 5th gear; 4 – thrust ring...

Disassembly and assembly of the secondary (driven) shaft
Attention! When installing new gears or a new secondary (driven) shaft, observe the technical data. Caution! If the secondary (driven) shaft or tapered roller bearing is replaced, the secondary (driven) shaft must be...

Disassembling and assembling the differential
Caution! Before assembly, heat the inner ring/tapered roller bearing to 100°C. Replace both tapered roller bearings together. Attention! In case of replacement of tapered roller bearing, differential case, gearbox...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Link to this section in various formats

TEXTHTMLBB Code

Octavia 3 (2013-2019)