Doors and their seal in the body frame Front door hinges and safety pin 1 – upper door hinge; 2 - stiffener of the upper loop; 3 - the inner surface of the door; 4 - bolt; 5 - cork; 6 - the outer surface of the door; 7 - rack; 8 - hinge bolt; 9 - lower door...
Door glass and seals Glass marking All door glass after tinting have a greenish tint. For safety purposes, the glasses are tempered, their thickness is 4±0.2 mm. At the front doors, the windows are lowered; at the rear doors in the front of...
Power windows doors Front door power window, manual/electric 1 – the window lifter operated manually; 2 - lowered glass; 3 - protective film of the door Rear side door power window, manually operated/electrically operated 1 – the window...
Front and rear door locks Mounting the external handle - side door lock 1 - door handle; 2 - patented cylindrical lock; 3 – lock pad; 4 - lock cartridge; 5 - cover; 6 – a bolt with a head with an internal hexagon; 7 - door handle housing Front...
Door panels — removal and installation Door panels in vehicles with manual window controls Door panel (manual window control) Installing the protective film and fastening clips of the door panel (E, F) 1 - a plug in a car without a radio; 2 - bushing; 3 –...
Protective door trim Outer protective door trim 1 - protective foil of the adhesive surface; 2 – a protective overlay of a forward door; 3 – a protective overlay of a back door; 4 - outer sheet of the front door; 5 - outer sheet of the rear...
Hinged luggage compartment lid The hinged cover gives access to a luggage compartment. The cover is an independent assembly unit. The design solution and suspension allow it to be folded back strongly, which is an advantage when loading bulky luggage...
Luggage compartment lid unshaped (welded) The design of the luggage compartment lid is similar to that of the door. It is welded from outer and inner sheets and several stiffeners. Along the contour, the outer sheet is beaded over the inner one. The flanging is...
Luggage compartment lid decorated The luggage compartment lid mounting assembly includes: lid lock, window glass, lid supports, trim panel and GOZ lights. In the case of installing a central door lock, a power unit is also installed in the luggage...
Luggage compartment lid locking system Luggage compartment lid - installation of a lock, latch, release handle and GOZ lighting bar 1 - squeezing handle assembly; 2 - bolt; 3 - overlay lighting GOZ; 4 - lock; 5 - holes for fixing the GOZ lighting trim; 6 -...
Glass of the luggage compartment lid window The luggage compartment lid window is made of safety tempered (cured) glass and standardly tinted in a greenish tint. The glass markings are shown in fig. Glass marking. Glass thickness 3±0.2 mm. A horizontally oriented...
Upholstered panel, seal, stops and boot lid handle Seal and stops for rear lid 1 - adjusting emphasis on the body; 2 - adjusting emphasis of the cover; 3 - bolt; 4 - bolt; 5 - placement of stops; 6 - protective foil; 7 - seal; 8 - vulcanization seal seal; 9 - luggage...
Rear window wiper and washer Fitting the tailgate wiper motor and detailing the shaft seal 1 - sealing the wiper motor shaft in the luggage compartment lid sheet with a rubber bushing; 2 - hose; 3 - rear wiper motor Rear wiper blade attachment and...
Trunk Lid Supports Installation of gas-filled props of the luggage compartment lid 1 - holder with a spherical pin; 2 - gas-filled support; 3 - spherical pin in the open (raised) position, the luggage compartment lid is held by two...
Windshield glass Marks in the lower black strip of the windshield for installing the brushes 1 - windshield; 2 - label; a - installation of brushes on marks; b - tolerance±5 mm Bonding glass to windshield frame A - upper part; B - lower...
Dismantling the trunk lid Attention! In order not to damage the paintwork, a hexagon socket wrench with a shorter side, shortened to about 10 mm, should be used. Dismantling the trunk lid 1. Remove trunk lid molding. 2. Having disconnected the...
Dismantling the gas-filled shock absorber of the trunk Attention! If the gas-filled shock absorber is reused, the fastening collar cannot be completely pulled out of the spherical bushing of the gas-filled shock absorber, otherwise it would be damaged. Disassembly of the...
Removing gas from the gas-filled shock absorber of the trunk Warning! It is only possible to clamp the shock absorber to the specified distance, otherwise there is a risk of injury! Attention! Use protective goggles for cutting. Attention! During cutting, cover the cut with a...
Trunk lid lock assembly diagram Trunk lid lock assembly diagram 1 - screw; 2 - button; 3 - pull handle; 4 - overlay; 5 - eye of the lock; 6 - 30 Nm; 7 - 30 Nm; 8 - constipation of the trunk lid; 9 - thrust; 10 – 10 Nm Disassembly Button 1. Remove...
Assembly diagram of the front doors Assembly diagram of the front doors 1 - lining; 2 – an external rear-view mirror 3 – the directing sealant of glass (pressed into the window frame); 4 - outer protective sealing profile of the cavity of the lower part...
Disassembly and assembly of front doors Dismantling the front doors 1. To take the lower upholstery of a rack. 2. Disconnect connector 1 at the column. Front door assembly 1. Unscrew locking pin 1 from the upper attachment. 2. Stud tightening torque = 20 Nm....
Assembly diagram of the front door lock Assembly diagram of the door lock 1 - traction cable for control from the inside, suspended on the locking part of the outer handle; 2 - safety button rod 3 - safety button (screwed on); 4 - inner locking part of the...
Disassembly and assembly of the front door lock Disassembly and assembly of the door lock 1. Remove the outer door handle. 2. Remove door molding. 3. Remove the power window device. 4. Unscrew screws 1 (tightening torque = 8 Nm). 5. Loosen the fixing screws 2 of the...
Hinged Glass Sunroof Assembly Diagram Attention! Center the seal on the right side. Before proceeding with installation, lubricate the sealing lip with a slip agent (water). Details of a flip-down, sliding glass sunroof in a car 1 - glass solar hatch...