Car engine cooling system Skoda Superb 2

Engine Cooling and Cabin Air Conditioning System Specifications
Type, volume and characteristics of antifreeze and coolant — see Specifications to Chapter 1 Opening pressure of the valve in the expansion tank cap, bar — 1.4 - 1.6 Pressure for checking the cooling system for leaks,...

General information and precautions
The engine cooling system circuit diagrams are shown in Figures 1.1-1.4. Installation details for individual components are shown in the relevant sections. 1.1 Cooling system circuit of a 3.6 l petrol engine (using the...

Replacing the coolant, checking and adjusting its level, checking the cooling system
Note: A description of checking and adjusting the coolant level, as well as some cooling system checks, is provided in Sections 4 and 5 Chapter 1. The coolant type is specified in Specifications for Chapter 1 . The...

Removal and installation the radiator and its fans with the casing
Petrol models 3.6 l 1. Details of the installation of the radiator and its fan are shown in the accompanying illustration. 3.1 Details of installation of the radiator and its fans on 3.6L models 1 Upper coolant hose, to...

Removal and installation of the coolant pump and its parts
Petrol models 3.6 l 1. The installation details of the water pump and other parts of the engine cooling system are shown in the accompanying illustration. 4.1 Engine cooling system parts 1 To the top of the expansion...

Removal and installation the coolant circulation pump
Petrol models 3.6 l 1. The circulation pump "V55" is mounted on the bracket of auxiliary units (see illustration 4.1). To remove the pump, you need to remove this bracket ( see Chapter 2 ). Petrol models 1.4 l 2. The...

Removal and installation the thermostat
Petrol models 3.6 l 1. Thermostat installation details are shown in Illustration 4.1. 2. Drain the coolant (see section 2). 3. Set aside the electrical wiring connector (1 on the accompanying illustration) to the side,...

Removal and installation of sensors and some lines of the engine cooling system
Petrol models 1.8 and 2.0 l: coolant lines and coolant temperature sensor "G62" (ECT) 1. The details of the installation of the coolant lines are shown in the accompanying illustration. Removal and installation of...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Petrol engines 1.2 l: Cooling and lubrication system Skoda Fabia 2 (2007-2014)
➧ Power unit: Cooling system Skoda Rapid 1 (2012-2022)
➧ Petrol engines 1.2 l: Cooling system Skoda Octavia 3 (2013-2019)
➧ Power unit: Cooling system (diesel 2.0 l) Skoda Kodiaq 1 (2016-2024)
➧ Power unit: Cooling system Skoda Yeti (2009-2017)
➧ Power unit: Cooling and heating Skoda Favorit (1987-1994)

Link to this section in various formats

TEXTHTMLBB Code