Exterior (external body parts) Skoda Superb 2

Car body specifications
Gaps between body elements, mm Note: Use reference plate set #3371 to measure clearances between body components. Hatchback tailgate to body clearance values are given with seals and gas-filled struts installed. Gaps in...

Removal and installation the hood lock holder and its parts
1. The details of installing the bonnet lock holder are shown in the accompanying illustration. 2.1 Bonnet Lock Holder Installation Details 1 Hood lock holder 2 Metal amplifier 3 Lower part of the holder 1 4, 5 Bolt, 20...

Removal and installation of the front wing and its parts
1. Front wing installation details are shown in the accompanying illustration. 3.1 Front left wing installation details 1 Bolt, 8 Nm 2 Front left wing 3 Nut, 8 Nm 2. Remove the wheel arch liner ( see Section 6 ). 3....

Removal and installation of bumpers and towing hitch parts
Front bumper 1. Front bumper cover installation details are shown in the accompanying illustration. 4.1 Front bumper trim installation details 1 Fixator 2/3 Upper cover right/left shock absorber 4 Bolt, 3.5 Nm 5 Bumper...

Sunroof and roof rails
1. Roof rail installation details (only on station wagon models) are shown in the accompanying illustration. To remove the roof rail (1), remove the ceiling trim (see Part B) and remove the nuts (2). When installing,...

Removal and installation of sound insulation panels, mudguards, covers, spoilers, shields and other body trims
1. Details of installation of wheel arch liners are shown in the accompanying illustrations. To remove the liners, remove the corresponding wheel (if necessary) and unscrew the fasteners. When installing, tighten the...

Removal and installation of the hood and its parts
1. The details of the hood installation are shown in the accompanying illustration. 7.1 Bonnet installation details 1 Hood 2, 3 Stop buffer 4 Nut, 20 Nm 5 Loop 6 Corks 7 Guide piece 8 Gas-filled rack 9 Hinge, 20 Nm 2....

Removal and installation the fuel filler flap with cover
1. Unscrew the bolt (3 on the accompanying illustration) and carefully pull the hatch assembly (2) slightly out of the rear wing, avoiding damage to the paintwork. 8.1 Installation details of the hatch with cover 2....

Removal and installation the tailgate (using the Hatchback models as an example)
Note: The description of the removal of parts installed on the inside of the door is given in Parts B . 1. Details of installation and fastening of the tailgate are shown in the accompanying illustrations. 9.1a Tailgate...

Removal and installation of side doors and their parts
Note: The removal and installation of the outside mirror is described in Section 11 ; a description of the removal of parts installed on the inside of the door is given in Parts B . Note: After working with the locking...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Body and interior: Exterior (external elements) Skoda Fabia 2 (2007-2014)
➧ Body and interior: Exterior (external elements) Skoda Rapid 1 (2012-2022)
➧ Body and interior: Exterior (external elements) Skoda Octavia 3 (2013-2019)
➧ Body and interior: Exterior (external elements) Skoda Kodiaq 1 (2016-2024)
➧ Body and interior: Exterior (external elements) Skoda Yeti (2009-2017)
➧ Body and interior: Exterior (external elements) Skoda Felicia (1994-2001)

Link to this section in various formats

TEXTHTMLBB Code