Interior (internal body elements) Skoda Superb 2

Removal and installation the outside rearview mirror
1. The exterior rearview mirror assembly parts are shown in the accompanying illustration. To remove the mirror assembly, remove the front door trim ( see Part B ), disconnect the connector (4, if available), remove the...

Removal and installation interior rear view mirror
1. To remove the rear view mirror (2 on the accompanying illustration) without a rain sensor, turn it in the direction of the arrow (A) and remove it from the retaining plate (1). Installation is carried out in the...

Removal and installation of ceiling trim and parts located on it
1. To remove the sun visor (4 on the accompanying illustration) remove it from the holder (1), pry off the plug (6) with a thin screwdriver, unscrew the bolt (5), pull out the holder (7) of the visor and remove the...

Removal and installation of the center console and its parts
1. For installation details of the center console and its components, see the accompanying illustration. References in this section refer to this illustration. 14.1 Installation details of the center console and its...

Removal and installation of the instrument panel and its parts
1. Remove the center console ( see Section 14 ) and steering wheel ( see Chapter 10 ). 2. Remove the upper trim of the A-pillars ( see Section 17 ). 3. Using a plastic wedge, remove the top cover (1 on the accompanying...

Removal and installation the instrument panel beam
1. The instrument panel beam mounting details are shown in the accompanying illustration. References in this section refer to this illustration. To remove the bracket (9), remove the instrument panel beam (6) and...

Removal and installation of body trim panels
Note: Before installing the parts, make sure that their fasteners are intact. 1. To remove the upper trim of the A-pillar (2 on the accompanying illustration) unhook its fasteners (1) from the rack, starting from the...

Removal and installation door trim
Front doors 1. Unhook the switch block (1 on the accompanying illustration) in the direction of the arrows using a plastic wedge and disconnect the connectors of its electrical wiring. 18.1 Removing the switch block 2....

Removal and installation of seats and their parts
Front seat 1. To remove the front seat (1 on the accompanying illustration) disconnect the negative battery cable, move the seat forward, remove the bolts (2), then move the seat back, remove the bolts (4) and...

Removal and installation seat belts
Front seat belts 1. Front seat belt installation details are shown in the accompanying illustration. References in this subsection refer to this illustration. 20.1 Front seat belt installation details 1 Height...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Body and interior: Interior (internal elements) Skoda Fabia 2 (2007-2014)
➧ Body and interior: Interior (internal elements) Skoda Rapid 1 (2012-2022)
➧ Body and interior: Interior (internal elements) Skoda Octavia 1 (1996-2004)
➧ Body and interior: Interior (internal elements) Skoda Kodiaq 1 (2016-2024)
➧ Body and interior: Interior (internal elements) Skoda Yeti (2009-2017)
➧ Body and interior: Interior (salon) Skoda Favorit (1987-1994)

Link to this section in various formats

TEXTHTMLBB Code