Removal and installation the coolant circulation pump (Skoda Superb B6)

Petrol models 3.6 l

1. The circulation pump "V55" is mounted on the bracket of auxiliary units (see illustration 4.1). To remove the pump, you need to remove this bracket (see Chapter 2).

Petrol models 1.4 l

2. The installation details of the coolant pump and coolant circulation pump are shown in Figure 4.11.

3. Disconnect the connector (3 in illustration 15.22 Chapter 2), unscrew the bolt (2) and remove the coolant circulation pump "V50" from the bracket. Clamp the coolant hoses (2) and disconnect them from the pump, collecting the leaking coolant.

4. Installation is carried out in reverse order.

Petrol models 1.8 and 2.0 l

5. The details of the installation of the coolant circulation pump are shown in the accompanying illustration.



6. Open the expansion tank and remove the sound insulation under the engine compartment (see Chapter 11).



7. Disconnect the connector (1 in illustration 23.26 Chapter 2) coolant circulation pump "V51", disconnect the hoses (arrows), unscrew the bolt (2) and remove the pump.

8. Installation is carried out in reverse order.

Diesel models 2.0 l (cFFB, CFGB, CLJA engines)

9. The installation details of the coolant circulation pump No.2 "V178" are shown in Figure 7.7.