46.1a Lubrication system component installation details
1 Bolt, 15 Nm
2 Nut, 15 Nm
3 Bracket
4 Star
5 Probe
6 Tube
7 Feeler gauge guide tube
8 Oil nozzle
9 Valve 0.25-0.32 bar, 27 Nm
10, 17 Sealing ring, subject to replacement
11 Oil intake pipe
12 Relief plate
13 Engine oil pan
14 Drain plug, must be replaced together with the gasket, 30 Nm
15 Bolt, subject to replacement, 10 Nm
16 Engine oil level and temperature sensor
18 Oil pump, with pressure reducing valve 12 bar
19 Oil pump sprocket
20 Rear bracket
21 Bolt, 15 Nm
22 Bolt, to be replaced, 20 Nm, then tighten to an angle of 90°
23 Oil pump chain
24 Front sealing flange
25 Chain tensioner, do not disassemble, if the spring breaks, replace it entirely, 16 Nm
46.1b Oil Filter and Oil Cooler Installation Details
1, 10 Threaded plug, 25 Nm
2 Gasket, subject to replacement
3 Oil cooler
4, 6 Gasket, subject to replacement
5 Bolt, to be replaced, 15 Nm, then tighten to an angle of 90°
7 Oil filter holder with bypass valve
8, 11, 13, 16 Sealing ring, subject to replacement
9 D/V engine oil pressure, 0.7 bar, 20 Nm
12 Filter element
14 Oil supply line, to turbocharger, 22 Nm
15 Connection, 35 Nm