1. Fuel line: vehicles with independent heater, from the independent heater metering pump; don't overdo it
2. Fuel supply line: to the engine; is secured to the fuel tank with clamps; don't overdo it
3. Ventilation pipe: to the electromagnetic valve 1 of the adsorber "N80"; is secured to the fuel tank with clamps; don't overdo it
4. Bracket: for fuel pump control unit "J538"
5. 20 Nm + turn 90° (¼ turn): replacement
6. 8 Nm + turn 90° (¼ turn): replacement
7. Filler cap: when screwed in correctly, a characteristic click should be heard; attached with a cable to the filler cap assembly to prevent loss during refueling
8. 8 Nm: for fastening the filler neck; replacement
9. Ground connection wire: filler neck; to remove electrostatic charge
10. Ventilation pipe: to the container with activated carbon; is secured to the fuel tank with clamps; don't overdo it
11. Ventilation pipe: to the container with activated carbon; is secured to the fuel tank with clamps; don't overdo it
12. Fuel tank
13. 20 Nm + turn 90° (¼ turn): replacement
14. 2 Nm: heat shield
15. Heat-protective casing: fuel tank
16. Clamp: install in the proper position
17. 20 Nm + turn 90° (¼ turn): replace