Warning! For vehicles with a radio equipped with an anti-theft jamming code, the code must be identified and marked.
Attention! In order to perform work in the engine compartment, it is necessary to disconnect the battery wire to short-circuit to ground.
Caution: To change the Bowden cables, you must completely remove the gear shift drive.
Caution! Do not bend the Bowden cables. All contact surfaces should be lubricated with polyurea grease "G 052 142 A2".
Position for assembling the gear shift drive
(Data taken from this portal skodabook)
A – cable gear shift drive; B – cable drive for preselective gear shift control device; C – heat shield (before disassembling the gear shift drive, remove); arrow A – shift when shifting gears; arrow B – offset in preselective control; 1 – gear shift lever; 2 – preselective gear shift control lever with preselective control rod