Caution! Reusing a cut-out windshield is not permitted for safety reasons. The windshield must only be replaced with a new original part. Cut-out rear and side windows can be reused, but only after careful inspection. When replacing a windshield on a vehicle with a front camera for driver assistance systems, the camera must be adjusted after gluing the glass!
1. Windshield: Remove the windshield. Install the windshield.
2. Polyurethane adhesive sealant: Adhesive layer dimensions; -width b- = 6.5 mm -height a- height = 10 mm (including sealing profile, remaining sealant on glass and glass flange). Minimum curing time
3. Body flanging
4. Gap: From the side edge of the glass to the A-pillar. Using template "3371", set the same distance of 2.5±0.5 mm.
5. Gap: From the upper edge of the glass to the edge of the roof. Set using template -3371 - the same distance of 2.5±0.5 mm.
6. Adjusting wedge: Remove the glass installation device no earlier than 120 minutes after installing the glass.
7. Framing profile: is a component of the windshield
8. Drainage box casing: Separate from the framing profile only by hand, the use of tools is prohibited. Remove the drainage box casing. Install the drainage box casing.
Text taken from this website SkodaBook.ru