Insert tool T30116 -3- between the glass and the door frame onto the locking pin (position as shown). Release fixed window -1- with tool T30116 towards the outside. Remove fixed glass -1- together with outer seal from door frame.
Installation
Insert the fixed glass with the outer seal into the door frame. Insert the locking pin into the hole in the door frame. Push the fixed glass seal onto the door frame and insert the glass correctly. Screw in screw -2-. Seal threaded hole -2- with protective foil. The subsequent order of work is carried out in the reverse order of removal.
Note: The locking pin is part of the fixed glass. If damaged, the fixed glass must be replaced as an assembly.
Removal and installation of back fixed glass of a door (Combi)
Remove door glass. Remove glass guide. Remove the inner sealing strip of the door cavity. Remove protective film from threaded hole -2-. Remove screw -2-. Slide the seal from the inside of the fixed window pane under the rib of the door frame so that tool T30116 -3- can be inserted. Insert tool T30116 -3- between the glass and the door frame onto the locking pin (position as shown). Release fixed window -1- with tool T30116 towards the outside. Remove the fixed glass -1 - together with the outer seal from the door frame.
Installation
Insert the fixed glass with the outer seal into the door frame. Insert the locking pin into the hole in the door frame. Push the fixed glass seal onto the door frame and insert the glass correctly. Screw in screw -2-. Seal threaded hole -2- with protective foil. The subsequent order of work is carried out in the reverse order of removal.
Note: The locking pin is part of the fixed glass. If damaged, the fixed glass must be replaced as an assembly.