Bring to the service position. Disconnect the existing electrical connectors. Disconnect the air filter inlet hose. Disconnect the coolant system pipe and drain the coolant. Disconnect the condenser pipes. With the help of a second mechanic, remove the guide rods "T10093" on the left and right side members "2" and remove the front support panel together with the attachments "1".
Warning! Do not start the engine if the air conditioning and/or cooling system pipes are disconnected! Do not allow the condenser to hang on the pipes. Do not bend the condenser pipes.
Installation
Place the front support panel "1" on the side members "2". Insert the guide rods "T10093" on the left and right sides. Restore the installation position. Install in the reverse order. Make sure that all plug-in connections and hose connections are assembled correctly during assembly. Center the position of the front support panel on the side members relative to the wings.