Removal and installation, checking the glow plug with the flame sensor «Q8» (Skoda Octavia 5E)

Disassemble the independent/additional heater. Remove the spring "1" "arrow". Remove the lock washer "2". Remove the glow plug with the flame sensor "Q8" pos. "3".

Installation

Installation in reverse order.

Note: When installing, ensure that the retaining spring "1" and lock washer "2" are correctly positioned. The bare wires to the glow plug must not touch other parts (danger of short circuit). The correct operation of the glow plug with the flame sensor "Q8" can be checked using the Tester in the "Guided Fault Finding" mode.