Contents: Installation ⬇ Tightening torques ⬇
Remove the throttle control unit "J338".
Warning! Risk of injury from fuel under high pressure. Before opening the high-pressure circuit of the injection system, the fuel pressure must be released to residual pressure. Dirt may cause malfunctions.
Unscrew the union nuts "arrows" and remove the high-pressure fuel line.
Installation
Installation is in the reverse order. Wet the threads of the union nuts with clean engine oil. Tighten the union nuts of the high-pressure line by hand, making sure that the line is installed without tension. Tighten the union nuts. Install the throttle control unit "J338".
Tightening torques
[This material is published on the portal SKODABOOK.ru]