2. Carefully pry up with plastic wedge #3409 and remove the pads (1 and 2 in the accompanying illustration) central console, unscrew the screws (3), pull out the panel (4) of the climate control system with the control unit and disconnect its electrical wiring connectors.
3. When installing, tighten the screws with a torque of 1.5 Nm. If a new panel with a control unit is installed, connect the diagnostic tool (see Chapter 5) and execute the function "Initiate basic setting", and if after replacement the "AC" key does not work, perform the function "AC compressor inlet".
11.3 Fastening the system control panel "Climatic" ("Climatronic" - similarly)