The manual transmission code is indicated on the vehicle data sticker (see Introduction). Designation (e.g. "02Q", 2 in Illustrations 1.1a,d), code and date of issue (see illustrations 1.1bd) The manual transmission is additionally indicated on the manual transmission itself. The code and date of manufacture is an alphanumeric sequence, for example, "LHX 14099". In this sequence, "LHX" is the identification code, "14" is the day, "09" is the month, and "9" is the year (2009) of transmission manufacture.
1.1a. Location of the RKPP 0A4 designation
1.1b. Location of the code and production dates of the RCPP 0A4
1.1c. Location of the code and production dates of the manual transmission 0AJ
1.1d. Production date code (1) and designation (2) RKPP 02Q
The gearbox is housed in a cast crankcase attached to the rear end of the cylinder block. The manual transmission housing is equipped with holes for draining, checking and adjusting the oil level, closed with threaded plugs. Rotation is transmitted to the input (drive) shaft of the manual transmission from the engine crankshaft through the clutch assembly. The driven clutch disc is mounted on the splines of the primary shaft. A schematic representation of the organization of torque transmission is shown in figures 1.2a-c. In the 02Q manual transmission, two main gears are used: I - for gears 1st through 4th, II - for 5th and 6th gears, as well as for reverse gear.
1.2a. Schematic representation of the organization of torque transmission of the 0A4 manual transmission Arrows; Direction of movement; 1. Engine; 2. Clutch; 3. Manual transmission; 4. Input shaft; 5. Output shaft; 6. Differential; I-VI. 1-6 gears; R. Reverse gear; A. Main gear
1.2b. Schematic representation of the organization of torque transmission of the OAJ manual transmission Arrows; Direction of movement; 1. Engine; 2. Clutch; 3. Manual transmission; 4. Input shaft; 5. Output shaft; 6. Differential; I-VI. 1-6 gears; R. Reverse gear; A. Main gear
1.2c. Schematic representation of the organization of torque transmission of the 02Q AWD models Arrows; Direction of movement; 1. Engine; 2. Clutch; 3. Manual transmission; 4. Input shaft; 5. Output shaft 5th, 6th gear and reverse gear; 6. Output shaft 1st - 4th gear; 7. Front differential; 8. Angular transmission; 9. Cardan shaft; 10. Haldex coupling; 11. Rear final drive; 12. Rear differential; I-VI. 1-6 gears; R. Reverse gear; A. Front main gear; W1. Front angular gear; W2. Rear angular gear
Gear shifting is carried out by means of a gear shift lever located on the central console via cable drives (see illustrations 1.3a-b).
1.3a. Organization of the gear shift drive on models with 0A4 manual transmission Arrow A. Moving the gear selection; Arrow B. Moves the groove selection; A. Gear selector cable; B. Groove selection cable; C. Heat shield; 1. Gear selection lever (selector); 2. Groove selection lever
[The original can be viewed on: skodabook.ru]
1. Zb. Organization of the gearshift drive on models with RKPP 0A4
See captions for illustration 1.3a
1.3c. Organization of the gear shift drive on models with manual transmission 02Q
See captions for illustration 1.3a