2. Adjust the driver's seat to the rearmost position.
3. Drill out the rivets (2) and remove the cover (1) in an upward direction as shown in the figure below.
4. Unscrew the mounting screws (2) shown in the figure below.
5. Move the control module (1) and remove it from the holder (3), as shown in the figure below.
6. Open the latch and disconnect the wiring harness connector from the amplifier.
7. Release and disconnect the wiring harness connector from the digital audio module bus.
8. Place the protective cap (1) on the connector (2) shown in the figure below.
View the original on the website: skodabook.ru
9. Installation is carried out in the reverse order of removal.