Car clutch repair Skoda Kodiaq 1

Clutch pedal bushing — removal and installation
Removal 1. Disconnect the negative terminal from the battery. 2. Compress the tabs (arrows) and remove the posts (1) to the right side, as shown in the figure below. 3. Turn the clutch release master cylinder rod so...

Increased force spring — removal and installation
Removal 1. Disconnect the negative terminal from the battery. 2. If equipped, remove the driver side knee airbag module (1) as shown in the illustration below. 3. Unscrew the mounting bolt and remove the footwell...

Return spring and additional reinforcement spring (depending on the configuration) — removal and installation
Removal 1. Disconnect the negative terminal from the battery. 2. If equipped, remove the driver side knee airbag module (1) as shown in the illustration below. 3. Unscrew the mounting bolt and remove the footwell...

Clutch Pedal Mounting Bracket — removal and installation
Removal 1. If there is no access to the wiring harnesses of the clutch elements, it is necessary to remove the air filter housing assembly (for more details, see the corresponding section in the chapter " Intake and...

Clutch master cylinder — removal and installation
Removal Note: Cover all body surfaces to prevent brake fluid from getting on them. 1. If there is no access to the wiring harnesses of the clutch elements, it is necessary to remove the air filter housing assembly (for...

Hydraulic clutch release drive — general view
General appearance 1. Clutch release hydraulic drive slave cylinder; 2. Bleeding nipple for hydraulic drive; 3. Sealing ring; 4. Retainer; 5. Bleed nipple; 6. Anther; 7. Retainer; 8. Compensation hose; 9. Expansion tank...

Removal air (bleeding) from the clutch release hydraulic drive
Note: Necessary special devices, control and measuring instruments, as well as auxiliary means Device for filling and removing air, for example (VAS 5234) or (ROMESS). Note: When performing the following work, ensure...

Possible malfunctions and how to fix them
Malfunction Type of malfunction Measure The clutch pedal does not return to its original position. Presence of air in the tube system. Air must be removed from the wiring system; add brake fluid. Leaky wiring system,...

Clutch repair
General view. Sachs clutch 1. Dual-mass flywheel; 2. Clutch driven disc; 3. Clutch housing assembly with pressure plate; 4. Mounting bolt M6 and M7, tightening torque of mounting bolts during installation 13 Nm (M6) and...

Clutch assembly (Sachs) — removal and installation
Removal 1. Remove the gearbox assembly ( for more details, see the relevant section in this chapter ). 2. To prevent deformation of the pressure plate during removal (which would cause jerking during acceleration), it...

Luk Clutch — removal and installation
Removal 1. Remove the gearbox assembly ( for more details, see the relevant section in this chapter ). 2. To prevent deformation of the pressure plate during removal (which would cause jerking during acceleration), it...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Transmission: Clutch Skoda Rapid 1 (2012-2022)
➧ Transmission: Clutch Skoda Octavia 1 (1996-2004)
➧ Transmission: Clutch Skoda Yeti (2009-2017)
➧ Transmission: Clutch Skoda Felicia (1994-2001)

Link to this section in various formats

TEXTHTMLBB Code

Kodiaq 1 (2016-2024)