Drive shafts of car Skoda Kodiaq 1

Front Drive Shafts — components
Drive shaft VL107 1. Drive shaft mounting bolt; 2. Outer constant velocity joint (CV joint); 3. Retaining ring; 4. Fastening clamp, tightening torque 25 Nm; 5. Anther; 6. CV joint boot clamp, tightening torque 25 Nm; 7....

Drive shaft with CV joint VL107 — removal and installation
1. Unscrew the bolt securing the drive shaft to the front wheel hub. Attention: After loosening the hub nut, remove any load from the hub bearings. Otherwise, the weight of the vehicle will damage the wheel bearings and...

AAR3300i CV Joint Drive Shaft — removal and installation
1. Unscrew the bolt securing the drive shaft to the front wheel hub. Attention: After loosening the hub nut, remove any load from the hub bearings. Otherwise, the weight of the vehicle will damage the wheel bearings and...

Removal the drive shaft from the wheel hub
1. Unscrew the bolt securing the drive shaft to the front wheel hub. Attention: After loosening the hub nut, remove any load from the hub bearings. Otherwise, the weight of the vehicle will damage the wheel bearings and...

Disassembling and assembling the VL107 CV joint
Removal the outer CV joint 1. Clamp the drive shaft in a vice with jaws that prevent damage. 2. Turn the boot back. 3. Install the puller "T10382" so that the smooth side of the plate "T10382/1" faces the lead screws...

Disassembling and assembling the AAR3300i CV joint
Removal the outer CV joint 1. Clamp the drive shaft in a vice with jaws that prevent damage. 2. Turn the boot back. 3. Install the puller "T10382" so that the smooth side of the plate "T10382/1" faces the lead screws...

Rear Drive Shafts — components
Components 1. External constant velocity joint; 2. Mounting bolt; 3. Drive shaft assembly; 4. Boot fastening clamp, tightening torque 25 Nm; 5. CV joint boot; 6. Boot fastening clamp, tightening torque 25 Nm; 7. Spring...

Rear Drive Shafts — removal and installation
1. Loosen the nut securing the drive shaft to the wheel hub. Attention: After loosening the hub nut, remove any load from the hub bearings. Otherwise, the weight of the vehicle will damage the wheel bearings and reduce...

Cardan shaft — components
Components 1. Fastening bolt, tightening torque 20 Nm + 90 degrees; 2. Cardan shaft assembly; 3. Fastening bolt, tightening torque 50 Nm + 90 degrees; 4. Front angular gear; 5. Elastic element; 6. Fastening bolt,...

Final drive assembly
Components 1. Fastening bolt, tightening torque 60 Nm + 180 degrees; 2. Lock washer; 3. Support plate; 4. Fastening bolt, tightening torque 60 Nm + 180 degrees; 5. Rear suspension subframe assembly; 6. Lock washer; 7....

Possible malfunctions, their causes and solutions
Possible malfunctions, their causes and solutions Possible malfunction Cause Solution Drive shafts The car pulls to one side Clamping in constant velocity joints (CV joints) Replace Excessive wear or seizure of the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Transmission: Drive shafts Skoda Rapid 1 (2012-2022)
➧ Transmission: Drive shafts Skoda Yeti (2009-2017)
➧ Transmission: Drive shafts Skoda Favorit (1987-1994)

Link to this section in various formats

TEXTHTMLBB Code

Kodiaq 1 (2016-2024)