Attention! When installing the mirror, press only on the middle of the glass. It is absolutely necessary to wear protective gloves.
1 - casing (take off at right angle with the box (frame) doors); 2 - seal; 3 - 2 Nm; 4 - clamping clamp; 5 - door; 6 – mirror body; 7 - mirror glass (for both performances (with manual and electrical control) it is depressed); 8 - device for adjusting the position of the mirror (manually); 9 - nut; 10 - fastening screw (for manual mirror adjustment, 2 Nm); 11 - control knob (for manually adjusting the position of the mirror, put on the device for adjusting the position of the mirror); 12 - plug (for electric mirror adjustment); 13 - clamping clamp (for manual mirror adjustment)
Disassembly and assembly
1. Press the glass first at the bottom and then at the top (special tool "80-200").
Be careful not to damage the mirror housing.
2. Having installed the glass through the guide pins into the body, press it.