Adapting the sunroof control unit
Note: After replacing the glass cover, motor or drawer, adaptation must be carried out using the Tester or mechanically, see below. When adapted, the locking force limiter is switched off.
Sliding sunroof motor installation run
Ignition on, sunroof closed, rotary switch in home position. Press the sunroof open switch -1- and hold it in this position during the entire adaptation process (about 20 s). During adaptation, the glass lid opens and then closes completely. After the glass cover is completely closed, the adaptation process is completed and the switch button can be released.
Sliding sunroof blind control unit adaptation
Note: After replacing the glass cover, motor or drawer, adaptation must be carried out using the Tester or mechanically, see below. When adapted, the locking force limiter is switched off.
The ignition is on. Press the button -3- and hold it in this position during the entire adaptation process (about 20 s). During adaptation, the sunroof blind opens all the way and then closes completely. When the blind is completely closed, the adaptation process is completed and the button can be released.