Vehicle condition
The self-diagnosis function is designed to check the status of certain functions and components of the vehicle. The test is continuously carried out with the ignition on, both while driving and when the vehicle is stationary.
Information about some failures and malfunctions, urgent repairs or maintenance and other information is displayed on the display in the instrument cluster. Depending on the priority, this information is provided in the form of red or yellow symbols
Red symbols indicate danger (priority 1), while yellow corresponds to a warning (priority 2). In addition, text messages for the warrior are displayed in addition to the symbols.
If the menu item Vehicle status is displayed (Vehicle condition), then there is at least one error message. After selecting this menu, the first error message is displayed. If there are several error messages, the display shows an entry, for example, ⅓. This means that the first of the three available messages is displayed. The displayed fault message should be checked as soon as possible.
The fault symbol is displayed until the fault has been corrected. After the first viewing, the symbols are displayed without additional messages for the driver.
In the event of a fault, in addition to the display of the symbol and the output of a text message, a warning tone sounds.
- Priority 1 - three beeps.
- Priority 2 - one beep.