Remove the mounting frame. Detach the adhesive surface "3" of the outer seal "1" from the roof "2".
Installation
Remove traces of adhesive with suitable means. The connecting surface of the roof opening must be free of dust and degreased. If necessary, thoroughly clean the connecting surface with cleaning solution -D 009 401 04-. Wipe the connecting surface of the roof opening with a cloth with primer. Allow to dry. Align the new outer seal "1" by connecting the "arrow" in the center with the rear part of the roof opening. Remove the protective film from the adhesive layer "3" and press the seal to the roof "2". If there is excess, evenly settle the outer seal. Evenly press the outer seal, passing over it twice, for example, with the roller for the door seal "3356". Install the mounting frame.
