Contents: Removal and installation the upper…⬇ Removal and installation the lower…⬇ Removal and installation the lower…⬇
Removal and installation the upper part of the A-pillar trim
Disconnect the trim "1" from the A-pillar. Move the trim up the A-pillar and remove it.
Installation
Insert the pillar trim first under the edge of the front panel. Press the trim against the pillar until it locks into place.
Note: Before installation, check all fastening elements for damage and replace if necessary. Make sure that the trim is in the door seal frame after installation.
Removal and installation the lower trim of the A-pillar on the driver's side
Remove the hood release lever "2". Remove the dowel cap. Remove the dowel "3". Disconnect the trim "1" by turning it towards the passenger compartment. Disconnect the trim "1" from the threshold and from the lower trim of the B-pillar. Remove the trim.
Note: Before installation, check and replace dowel "3" if damaged.
(View the original on the website SkodaBook)
Installation
Installation in reverse order.
Note: Make sure that the trim is positioned within the door seal frame after installation.
Removal and installation the lower part of the A-pillar trim on the front passenger side
Disconnect trim "1" by turning it towards the passenger compartment. Disconnect trim "1" from the threshold and from the lower trim of the B-pillar.
Remove the trim.
Installation
Installation in reverse order.
Note: Before installation, check all fastening elements for damage and replace if necessary. Make sure that the trim is in the door seal frame after installation.