Driver side switch
Note: The installation procedure is identical for all types of electric window switches. When using a lever tool, seal the areas where the lever tool is inserted with regular adhesive tape.
Turn off the ignition and all electrical consumers. Using the wedge "3409" hook the switch "1" "arrow A", fold back "arrow B" and remove. Disconnect the connector.
Release the control unit from the locking protrusions of the "arrow" and remove it.
Installation in reverse order.
Switches on the front passenger side and on the rear doors
Remove the upper cover of the handle "1" "arrow".
Disconnect switch "1" "arrow" and remove from cover "2". Unlock and disconnect connector "1".
Installation
Installation in reverse order.
Note: When pressing the switch, hold the cover "2" in which the switch is located from above.
Press the switch into the trim until the latches audibly engage.