Note: Do not remove the steering wheel. To remove the screws securing the lower steering column trim, turn the steering wheel 90° to the left and then to the right.
First remove the upper and then the lower steering column trim. Disconnect the connectors from the "1" key and from the "2" reading coil. Insert two thin slotted screwdrivers (for example, watch screwdrivers) into the holes of the "arrow" and press the metal tabs. Grasp the lower part of the key "1" and press the lower trim of the steering column outward. When removing the reading coil "2", first remove the key, then carefully release the reading coil with the help of the wedge "3409" from the clamps.
Installation
If it has been removed, first insert the immobilizer reading coil "2" and click it. Then insert the key "1" into the lower trim and press it so that the locking tabs click into place. Connect the connector and install the lower and upper steering column trims.