Warning! Beware of burns from hot steam and hot coolant. When the engine is hot, the liquid in the cooling system is under pressure. When opening, cover the expansion tank cap with a rag and carefully unscrew it.
Drain the coolant. Remove the bracket for the attachments. Unscrew the bolts "4", "5" and remove the oil radiator "3" with the seal "2".
Installation
Installation in reverse order.
Note: Gaskets and sealing rings must be replaced. Secure all hose connections with suitable serial clamps.
View the original on the website: SKODABOOK.RU
Install the engine oil cooling radiator "3" together with the new seal "2". Install the bracket for the attachments. Fill with coolant. Fill the engine with oil and check its level.