Remove chain tensioner spring using tool -T10118- in -direction of arrow- and lock with locking pin -T40265-.
Release screws -arrows- and remove oil pump.
Installation
Installation in reverse order. Check that both mounting pins are inserted to center the oil pump. Before installing the oil pump, check the strainer in the oil intake and the oil passages at the top of the oil pan for dirt. Insert the oil pump sprocket into the drive chain and install the oil pump.
Attention! Risk of engine damage. Be sure to perform the following step, otherwise the chain tensioner spring will not move into the mounting position.
Pull out chain tensioner spring with tool -T10118- in -direction of arrow- and remove with tool -T40265-. Fit sealing ring -pos. 6- onto the new flow shut-off device and moisten it with engine oil. Insert and screw on the new flow stop device. Install the lower part of the oil pan. Fill the engine with oil and check its level.