Removing
1. Press on both sides of the seat cushion with your hands (1) in places of mounting elements (2), and then pull the cushion, applying the necessary force, in the direction of the arrow shown in the figure below.
2. Pull the seat cushion (1) in the direction of the arrows to detach it from the mounting hooks (2) on the right and left sides, as shown in the figure below.
3. Remove the rear seat cushion (1) assembled from inside the car.
Installation
Note. Before installing the rear seat cushion (1) check the technical condition of the mounting seals (2). If necessary, replace seals with new ones.
1. Install mounting seals (internal parts) (2) for attaching the rear seat cushion (1), as shown in the figure below.
Note. Always replace the internal parts of the mounting seals after disassembly (3) new seals.
2. Install mounting seals (outdoor parts) (3) through the holes in the floor covering, fix the seals in the bottom of the car, as shown in the figure below.
3. Move the rear seat cushion (1) in the direction of the arrows to fix it in the mounting hooks on both sides (2), as shown in the figure below.
4. Insert the inner parts of the mounting seals (2) rear seat cushions (1) into the outer seals (3), press the pillow until a characteristic click of the mounting seals.
Note. After installation, check and verify the rigidity of the assembly of the rear seat cushion.