Bleeding air from the hydraulic brake system without using a device for filling and bleeding the hydraulic brake drive (Skoda Rapid NH1)

1. By pressing the brake control pedal again, you should increase the pressure in the brake system.

2. Insert the hose onto the threaded plug to remove air (cylinder relief valve).

3. While pressing the brake control pedal, loosen the threaded plug of the ventilation hole and remove the air.

4. With the brake control pedal depressed, close the air release valve.

5. This procedure should be repeated until all air is removed from the brake system.

6. Perform a test drive with the ABS device activated.

(View the original on the website SKODABOOK.RU)