Convergence
Note.
- The total convergence of the rear axle wheels cannot be adjusted.
- However, it is possible to equalize the individual toe-in values evenly by moving the rear axle beam support brackets.
1. Loosen all screws of the support brackets (1) rear axle beams (2).
2. Move the rear axle support bracket (1) in the transverse direction.
3. If the measured values are still out of tolerance, the axle beam must be checked for damage and replaced if necessary.
Collapse
The camber angle on the rear axle cannot be adjusted.
If the values are out of tolerance, the cross slope of the vehicle must first be checked and, if necessary, corrected.
If the measured values are still out of tolerance, the axle beam must be checked for integrity and, if necessary, replaced.