Checking and replacing the working fluid and filter, replacing the flange shaft seals (Skoda Superb B6)

1. Checking the fluid level of the 6-speed DSG is done when replacing it (see Section 21 Chapter 1).

2. Replacement of the working fluid and filter of the 6-speed DSG is required every 60,000 km.

3. The filter should be replaced:

• every 60,000 km;
• after coolant gets into the DSG working fluid;
• when metal particles are detected in the DSG working fluid;
• after the clutch burns out or has a mechanical failure.

4. No filter replacement required:

• if oil did not get into the DSG working fluid when replacing the radiator;
• after replacing the selector shaft seal or the differential output shaft seals;
• after replacing the leaking block cover "Mechatronic", clutch or oil pump;
• after replacing sensors "G182" and "G509".

5. Replacement of flange shaft seals is carried out with the same features as described for DSG "OAM" in Section 9.

(Information copied from the resource: Skodabook.ru)