41.1. Oil pan and oil pump installation details 1. Bolt, 15 Nm; 2. Front sealing flange; 3. Oil pump drive belt; 4, 10. Bolt, 10 Nm; 5. Engine oil level dipstick; 6. Guide tube of the feeler gauge 5; 7. Retainer; 8. Centering bushings; 9, 21. Sealing ring, subject to replacement; 11. Oil pump, with check valve (at 4.5 bar) and a safety valve (10 bar); 12. Oil intake; 13. Soothing plate; 14, 15, 17. Bolt, 15 Nm; 16. Oil pan; 18. Drain plug, must be replaced together with its sealing ring, 30 Nm; 19. Bolt, subject to replacement, 10 Nm; 20. Sensor "G266" of temperature and level of engine oil; 22. Sensor wiring 20; 23. Pressure limiting valve, opens at 2.5 + 3.2 bar; 24. Oil nozzle for cooling the piston bottom
2. The installation details of the oil filter housing and oil cooler are shown in the illustration.
41.2. Oil filter housing and oil cooler installation details 1. Hexagon cap 32mm, 25Nm; 2-4. Sealing ring, subject to replacement; 5. Filter element; 6. Oil cooler; 7. Bolt, 5 Nm, then 11 Nm; 8. Gasket, subject to replacement; 9. Bolt, subject to replacement, 14 Nm, then tighten to an angle of 90°; 10. Filter element and oil cooler holder; 11. Gasket, subject to replacement
3. A description of the removal/installation of lubrication system parts is not provided due to the simplicity of these procedures.
[Information published on the website SkodaBook.ru]