Vehicle drive shafts Skoda Favorit

Drive shaft specifications
Type - Solid steel shafts of unequal length, with splined connection to the inner and outer CV joints, a dynamic vibration damper is installed on the right shaft of some models Lubrication (only during overhaul, see...

General description of drive shafts
Fig. 8.1. General view of the drive shaft assembly 1. Retaining ring; 2. Outer CV joint; 3. Large clamp of the protective cover; 4. Rubber protective cover; 5. Small clamp of protective cover; 6. Shaft; 7. Rubber...

Drive shafts — removal and installation
Note: If both drive shafts have been removed, do not move the vehicle or the front wheel bearings may be damaged. If it is absolutely necessary to move the vehicle, temporarily install the drive shafts and tighten their...

Drive shaft rubber boots — replacement
External CV joint Note: This procedure is much easier to perform if the drive shaft is removed from the vehicle. However, it is possible to disassemble the outer CV joint without separating the shaft from the...

Drive shaft overhaul — general description
1. If any of the checks described in Section 1 , wear is detected on any of the drive shaft joints, first check the drive shaft nut for tightness. To do this, remove the center cap of the wheel. If the locking rim is...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Transmission: Drive shafts Skoda Rapid 1 (2012-2022)
➧ Transmission: Drive shafts Skoda Kodiaq 1 (2016-2024)
➧ Transmission: Drive shafts Skoda Yeti (2009-2017)

Link to this section in various formats

TEXTHTMLBB Code

Felicia (1994-2001)