Direction indicators, alarm, parking light switch
E2 - turn indicator light switch;
E3 - switch for the emergency light signaling system;
E19 - switch for parking lights;
J2 - breaker for lanterns of the emergency light signaling system;
K6 - emergency light signaling device;
L35 - an incandescent lamp for lighting the switch of the emergency light signaling system;
M5 - incandescent lamp of the left front turn signal lamp;
M7 - incandescent lamp of the right front turn signal lamp;
M18 - incandescent lamp of the left side turn signal repeater;
M19 - incandescent lamp of the right side turn signal repeater;
T2j - two-pin plug connector, on the left side turn signal repeater;
T2k - two-pin plug connector, on the right side turn signal repeater;
T2l - two-pin plug connector, on the left front turn signal lamp;
T2m - two-pin plug connector, on the right front turn signal lamp;
T7a - 7-pin plug connector, on the switch for the hazard warning light system;
T12a - 12-pin connector, on the turn signal switch;
80 - connection on "mass" in the wiring harness behind the instrument panel;
119 - connection on "mass" in cable harness front left;
A5 - connection with a positive pole (right turn signal) in the wiring harness behind the instrument panel on the left;
A6 - connection with a positive pole (left turn signal) in the wiring harness behind the instrument panel on the left;
A43 - connection (57L) in the wiring harness behind the instrument panel;
A44 - connection (57R) in the wiring harness behind the instrument panel
F4 - switch for reversing lights;
L46 - incandescent lamp of the left rear fog lamp;
L47 - incandescent lamp of the right rear fog lamp;
M2 - incandescent lamp of the right rear position lamp;
M4 - incandescent lamp of the left rear position lamp;
M6 - incandescent lamp of the left rear indicator lamp;
M8 - incandescent lamp of the right rear indicator lamp;
M9 - incandescent lamp of the left brake light;
M10 - incandescent lamp of the right brake light;
M16 - incandescent lamp of the left reversing headlight;
M17 - incandescent lamp of the right reversing headlight;
T2e - two-pin plug connector, on the switch for reversing lights;
T6a - 6-pin male connector, in waterproof housing (red);
T6b - six-pin connector, on the left rear position lamp;
T6c - six-pin connector, on the right tail light;
T10a - 10-pin male connector, in waterproof housing (white);
59 - connection point on "mass" close to the left tail light;
86 - connection on "mass" in the rear wiring harness;
196 - connection on "mass" in the left rear grouped light fixture;
197 - connection on "mass" in the right rear grouped light fixture;
A5 - connection with a positive pole (right turn signal) in the wiring harness behind the instrument panel on the left;
A6 - connection with a positive pole (left turn signal) in the wiring harness behind the instrument panel on the left;
A18 - connection (54) in the wiring harness behind the instrument panel on the left;
A47 - connection (55) in the wiring harness behind the instrument panel;
A84 - connection (58L) in the wiring harness behind the instrument panel on the left;
A85 - connection (58R) in the wiring harness behind the instrument panel on the left
E22 - windshield wiper switch;
J31 - double stroke switch for wiper blades;
T2n - 2-pin connector, on the windshield wiper pump;
T5e - 5-pin connector, on the wiper motor;
T8b - 8-pin connector, on the wiper switch;
V - windshield wiper motor;
V5 - windshield wiper pump;
80 - connection on "mass" in the wiring harness behind the instrument panel;
119 - connection on "mass" in wiring harness front left;
A36 - connection (53a) in the wiring harness behind the instrument panel on the left;
A102 - connection (wiper) in the wiring harness behind the instrument panel;
D64 - connection (53c) in the wiring harness behind the instrument panel
The structure of circuit diagrams of electrical equipment is located here →
Symbols found in circuit diagrams are here →
Explanations for the symbols found in the wiring diagrams are here →